80KN Pulling Force Grooved 24mm Steel Wire Rope Winch Drum
Design Parameters Of Wire Rope Winch Drum
1. Drum diameter
2. Width between flanges
3. Wire rope or cable diameter
4. Rotation direction of wire rope: left and right
7. Material of the drum
8. Diameter of flange
9. Maximum working load of wire rope
10. The maximum capacity of the wire rope/cable
11. The position angle of the drum and the fixed pulley
12. Rope entry mode
13. If possible, provide detailed drum drawings:
Note: The drum is divided into integral type and split type, the Integral need drawing processing.
The split need inner diameter, outer diameter, length, the diameter of the wire rope, the direction of the rope groove (left or right)
Technical Parameters
| ROPE DIAMETER | 24mm | PULLING FORCE | 80KN |
| LAYERS | 5 | NUMBER OF GROOVES | 19.5 |
| GROOVE TYPE | LEBUS | THE DIRECTION | RIGHT-HAND |
| NUMBER OF GROOVES | 18.5 | ROPE CAPACITY | 220M |
| Reduction | BUILT-IN REDUCER | WEIGHT | 690KG |
The Characteristics Of The Grooves
1. It has specifically groove to make wire rope spooling orderly and uniform strength on every layer.
2. It can be calculated the exact forces that the rope imposed on the drum.
3. The spooling is totally under control,which prevents lower layers being crushed or pinched by upper layers
4. With the groove,the continuous groove in the drum is parallel to the flange except for two crossover points on each Revelution where the groove moves across the drum half a pitch to give a pull pitch of movement for each pitch.
Processing Technic
Show Details
Product Tags:
|
|
LBS 80KN Pulling Force Rope Winch Drum With 24mm Steel Wire Images
|
